How to Install Linux and Set Up Partitions

How to Install Linux and Set Up Partitions Installing Linux for the first time may seem intimidating, but it is simpler than you think.  Step 1 : Choose a Linux Distribution Popular beginner-friendly choices :  Ubuntu – Most recommended for first-time users Linux Mint – Familiar Windows-like interface Fedora – Modern and developer-focused Download the ISO file from the official website of your chosen distribution. Step 2 : Create a Bootable USB Drive You’ll need : A USB flash drive (at least 4GB) ISO image of the Linux distro Tool like Rufus (Windows) , balenaEtcher (cross-platform) , or UNetbootin Steps (using Rufus) : Insert USB drive. Select the Linux ISO file. Use “GPT” for UEFI systems, “MBR” for legacy BIOS. Start writing. Step 3 : Pre...

Beginner`s Guide to Building a PC

Beginner`s Guide to Building a PC

Building your own custom PC can be one of the most rewarding experiences for any tech enthusiast or beginner.

Not only does it save money comparedto pre-built systems, but it also gives you full control over the components and performance.


1. What You Need to Build a PC

Before you begin, make sure you have all the essential components :

  • Processor (CPU)
  • Motherboard
  • Memory (RAM)
  • Storage (HDD or SSD)
  • Graphics Card (GPU) - if not using integrated graphics
  • Power Supply Unit (PSU)
  • PC Case
  • Cooling system (stock cooler or aftermarket)
  • Operating System (OS) - usually Windows or Linux

Also prepare a screwdriver, anti-static wrist strap, and a clean, static-free workspace.


2. Step-by-Step PC Building Instructions

Step 1. Prepare the Case and Workspace

Unbox your PC case and remove any pre-installed panels. Ensure your workspace is clean and well-lit. Ground yourself to avois static electricity.

Step 2. Install the CPU

open the CPU socket on the motherboard. Align the CPU with the socket (use the triangle marking), gently place it in, and lock it down with the retention arm.

Step 3. Install the RAM

Open the RAM slots on the motherboard, align the notches on the RAM sticks, and push firmly until they click into place.

Step 4. Mount the Motherboard

Place the motherboard inside the case, aligning it with the standoff screws. Use a screwdriver to secure it properly.

Step 5. Install Storage Devices

Mount your SSD or HDD into the appropriate bay or M.2 slot. Connect the SATA data and power cables if needed.

Step 6. Connect the Power Supply

Install the PSU into the case connect the 24-pin ATX, 8-pin CPU power, and any SATA or PCIe cables.

Step 7. Install the GPU

Insert the graphics card into the PCIe x 16 slot on the motherboard. Secure it to the case with screws and connect PCIe power cables if needed.

Step 8. Connect Case Cables

Attach all front panel connectors (power button, USB, audio) to the motherboard according to the manual.

Step 9. Cable Management

Use zip ties to organize cables neatly. Proper cable management improves airflow and makes future upgrades easier.

Step 10. Boot and Install Operating System

Plug in your monitor and keyboard, then power on your system. Enter the BIOS to check if components are recognized. Boot from a USB drive to install your OS.

Popular posts from this blog

How to Replace a CPU and Apply Thermal Paste the Right Way

How to Replace a CPU and Apply Thermal Paste the Right Way Upgrading your CPU is one of the most effective ways to boost your computer’s performance.  However, replacing a processor and applying thermal paste can be tricky if you have never done it before.  What You will Need New CPU compatible with your motherboard Thermal paste Screwdriver Isopropyl alcohol and lint-free cloth Anti-static wrist strap CPU cooler (air or liquid) Step-by-Step: Replacing a CPU and Applying Thermal Paste Step 1: Power Off and Disconnect the PC Turn off your PC and unplug it from the wall.  Wait a few minutes to let all components cool down. Step 2: Remove the CPU Cooler Unscrew or unclip the cooler.  Gently twist it to break the thermal paste seal, then lift it straight up. Step 3: Clean the Old Thermal Paste Use isopropyl alcohol and a lint-free cloth to clean off the old thermal paste from the CPU and the cooler’s contact plate. Step 4: Remove the Old CPU Lift the retention arm on the...
Read more

Understanding BIOS and UEFI

Understanding BIOS and UEFI BIOS and UEFI are essential firmware systems that control how your computer boots and interacts with hardware.  1. What Is BIOS and UEFI ? BIOS (Basic Input/Output System) : Legacy firmware interface used in older PCs. UEFI (Unified Extensible Firmware Interface) : Modern replacement for BIOS with a graphical interface and advanced features like secure boot and larger drive support. 2. How to Access BIOS or UEFI Restart your PC and press the specific key during boot (usually Del , F2 , or F12 depending on the motherboard). On Windows 11, go to Settings > Update & Security > Recovery > Advanced Startup > Restart Now , then choose UEFI Firmware Settings . 3. Common BIOS/UEFI Settings Explained Boot Order : Set which device the system boots from (SSD, USB, etc.). SATA Mode (AHCI/RAID) : AHCI is recommended for SSD performance. XMP (Extreme Memory Profile) : Enables higher RAM speeds if supported. Secur...
Read more